Tile Adhesives
Grouts
Waterproofing Systems
On this page: Datasheets: Tile Adhesives, Grouts/Epoxy, Surface Preparation, Waterproofing
Hint: Click on the underlined product names (links) to open the corresponding PDF file. If you are using Internet Explorer on a PC you can right mouse click the link and choose the "Save Target As..." option to download the file to your computer - you will then have the information available at your convenience.
Premixed, white, flexible wall tile adhesive for internal tiling.
Premium grade, flexible wall and floor tile adhesive. Can be used over early age concrete, render/screeds and hairline cracked concrete.
Premixed, white wall tile adhesive with extended skinning time and non-slip features.
Off white,cement based adhesive for general wall and floor tiling
An economical rubber modified adhesive for general domestic floor tiling installations where minimal shrinkage movement is expected.
Isoflex
1-part Isoflex has all the flexibility of a two part rubber adhesive plus a wider application range (suitable for shower recess floors, external use).
Two part Isoflex, flexible wall and floor tile adhesive especially suited for timber floors.
Fast drying, multipurpose wall and floor tile adhesive.
High performance adhesive with exceptional bond strength. Optima is ideal for adhering ceramic tiles or stone to difficult surfaces (e.g. fibreglass).
A fast setting, polymer modified adhesive that can be grouted after 2 hours and has a longer pot life.
Premixed ResaflexResilient, premixed wall tile adhesive
Cement based, polymer-fortified wall and floor tile adhesive with high bonding strength.
Mortar additive for reinforcing sand and cement screeds
Liquid polymer additive that improves flexibility, adhesion and shear strength of cement based adhesives.
100% solids epoxy grouts with superior stain, chemical and physical resistance.
Standard coloured grout for joints between 5 and 15mm.
Super smooth, flexible, mould resistant coloured grout for joints 1 to 5mm wide.
Liquid additive for grout which adds strength, flexibility and enhances colour.
2-part underlay for isolating base movement in floor substrates prior to the application of ceramic tiles.
Underlay for use under hard floor coverings such as ceramic tiles and parquetry to reduce impact sound with IIC rating 56 - 60.
All-purpose primer for enhancing adhesion of ABA products over a diverse range of substrates.
Two component, water based epoxy coating for consolidating weak substrates, bonding to improperly cleaned surfaces and for sealing and dustproofing industrial concrete flooring.
Two component water based epoxy water stop for priming early age and damp concrete.
Two component water based epoxy coating for bonding new to old concrete, as a cement mortar admixture and a concrete curing membrane.
Concentrated liquid polymer for temporary waterproofing or as an admix for cement renders, toppings and covings.
Two component, hard wearing epoxy finish for hygiene or heavy wear areas
Miscellaneous products for use with Shelterbit, Sheltercoat and Butynol waterproofing membranes.
© Ardex Australia 2004 Legal Information
 |
 |
 |
 |
 |
 |
 |
 |
 |